1. Executive Overview: Structural Mechanics
When selecting a relocatable clear-span building, clients frequently compare traditional A-frame box-beam aluminum tents with curved steel lattice arch tensile structures. While both provide weather-tight enclosures, their internal force paths and load capacities differ fundamentally:
- Conventional A-Frame Structures: Rely on straight rafters and upright legs subjected to severe bending moments at the eave joints. To achieve spans beyond 25m, bulky internal knee braces and tension tie rods are required, obstructing internal overhead clearances.
- Curved Lattice Arch Tensile Structures (ATS): Transfer environmental gravity and lateral wind loads along the continuous arc of the lattice truss primarily in pure compression. By eliminating internal diagonal tie cables, 100% of the internal volume remains open and column-free from slab to apex.
Engineering Takeaway for Facility Directors
An arched tensile structure achieves equal or higher wind/snow load resistance (up to 180 km/h wind and 2.5 kN/m² ground snow) with up to 30% less steel tonnage compared to rigid portal frame buildings, delivering dramatic savings in ocean freight and crane rental fees.
2. Technical Performance Matrix
| Evaluation Parameter |
Arched Tensile Structure (SPANBEST ATS) |
Standard Aluminum Clear-Span Tent |
Conventional Pre-Engineered Steel (PEB) |
| Clear Span Band |
10 m – 50 m (Modular Infinite Length) |
10 m – 40 m |
15 m – 60 m |
| Primary Framework |
Hot-Dip Galvanized Q355B Tubular Lattice Arch |
Hard-Anodized 6082-T6 Aluminum Box Beams |
Tapered Q355B Welded H-Beams / I-Sections |
| Roof Cladding |
Pre-Stressed 850 – 1150 g/m² PVDF Membrane |
650 – 850 g/m² PVC Tarpaulin Slid in Track |
Single Skin Corrugated Sheet or Sandwich Panel |
| Erection Speed (2,000 m²) |
6 – 8 Working Days |
5 – 7 Working Days |
6 – 10 Weeks (Heavy Crane Required) |
| Internal Headroom |
Continuous Curved Apex with Zero Obstruction |
Restricted by Eaves Braces & Tie Cables |
High Clear, but Rigid Columns on Boundary |
| Natural Daylighting |
12% – 16% Diffused Solar Light (Zero Glare) |
8% – 12% Translucent / Opaque |
0% (Requires Artificial High-Bay Lighting) |
| Corrosion Resistance |
ISO 1461 Hot-Dip Galv (≥ 85 μm) — Salt/Chemical Immune |
Rust-Proof Anodized Aluminum |
Requires Regular Epoxy Maintenance / Rust Touch-Up |
3. PVDF Architectural Membrane Engineering
All SPANBEST Arched Tensile Structures utilize premium polyvinylidene fluoride (PVDF) coated high-tenacity low-wick polyester base fabrics (benchmark: Serge Ferrari 902S2 / 1002S2 / Mehler Valmex). Key material specifications include:
- Dual-Sided PVDF + TiO2 Lacquer: The topcoat breaks down airborne organic dust under solar UV radiation. Natural rain washes the grime clean, maintaining pristine white appearance for 15+ years.
- Pre-Stressed Tensioning: Membrane panels are numbered and laser-cut to the specific 3D double-curvature of the steel arch, pulled into heavy aluminum Keder tracks and mechanically tensioned to prevent flutter and fatigue.
- Thermal Control Packages: Available with dual-layer insulated membrane quilt achieving an effective insulation value of R-12 to R-16 for heated tennis stadiums, padel courts, and cold-storage logistics depots.
4. Quick Modular Erection Sequence
SPANBEST structures ship as complete, bolt-together prefabricated kits packaged in standard 40ft containers:
- Footing Preparation: Chemical anchor studs on concrete pads, soil screw anchors on asphalt, or ISO shipping container top-twist mounts.
- Ground Truss Bolting: Arch chords and lattice webs are bolted flat on the ground. No on-site cutting or welding.
- Tilt-Up & Bay Lacing: Successive arches are tilted into position and secured with hot-dip galvanized purlins and diagonal cable bracing.
- Keder Track Tensioning: Pre-cut PVDF roof panels are pulled over the arches, tensioned evenly at the base, and locked watertight.
Need Stamped Engineering Drawings for Your Project?
Submit your clear span, length, and site location. SPANBEST licensed structural engineers return a complete GA drawing and indicative cost calculation within 48 hours.
Request GA Drawing & Pricing →
5. Recommended Applications
Arched tensile systems are globally deployed in four primary industries:
- Indoor Sports Facilities: Tennis court covers, padel arenas, 5-a-side indoor soccer, and equestrian riding halls where high side-wall clearance and diffused daylighting are critical.
- Luxury Events & Commercial Hospitality: Gala reception halls, winery event spaces, concert auditoriums, and brand pop-ups with transparent or insulated glass gable walls.
- Industrial & Port Bulk Storage: Temporary customs bonded warehouses, salt and sand storage, fertilizer transshipment depots, and heavy machinery overhaul bays.
- Aviation & Rotorcraft Shelters: Helicopter search-and-rescue hangars, corporate jet storage, and airside ground support equipment (GSE) maintenance facilities.